ALL PURPOSE CLEANER
• Excellent cleaner for the following: hot line tools, trucks, buckets,
booms, rubber goods, rigid cover up, painted surfaces and aluminum
metal, shop machinery, hand cleaner, all plastic surfaces
• Safe and gives the following benefits: biogradable, non-toxic, non-alka -
li, non-acid, non-flammable, gentle to the skin, requires no ventilation
• Can be applied with a soft cloth, sponge or hand dispenser
• Concentrate formula mixing ratio is 20 parts water to 1 part concentrate
| CAT NO |
DESCRIPTION |
LBS |
| 10-169 |
ALL PURPOSE CLEANER - PREMIXED ONE GALLON |
8.0 |
| 10-172 |
ALL PURPOSE CLEANER - PREMIXED ONE CASE (6 GALLONS) |
48.0 |
| 10-168 |
ALL PURPOSE CLEANER - CONCENTRATE ONE GALLON |
8.0 |
| 10-194 |
ALL PURPOSE CLEANER - CONCENTRATE ONE CASE (6 GALLONS) |
48.0 |
| 10-195 |
ALL PURPOSE CLEANER - CONCENTRATE 5 GALLON DRUM |
40.0 |
HAND DISPENSER
• Hand trigger action pump with adjustable nozzle produces a fine
mist or a pin stream
• Use with All Purpose Cleaner to direct cleaner in confined areas
| CAT NO |
DESCRIPTION |
LBS |
| 10-089-3 |
HAND DISPENSER |
1.0 |
HOT STICK BOOM AND BUCKET WAX
• High grade carnuba wax specially formulated for application to
fiberglass finishes
• Properly applied, the wax will produce a hard tack-free weather
resistant surface - resistant to temperatures and weather extremes
• Wax may be applied by hand and hand polished - wax on / wax off
• Do not let wax dry on stick
| CAT NO |
DESCRIPTION |
LBS |
| 10-091 |
WAX - 1 CAN (14 oz) |
1.7 |
| 10-091-1 |
WAX - 1/2 CASE (6 CANS) |
8.0 |
| 10-091-2 |
WAX - 1 CASE (12 CANS) |
15.0 |
FIBERGLASS CLEANING AND REFINISHING KIT
• Kit includes items necessary to clean and/or restore fiberglass hot sticks, booms, and buckets
• Kit consists of...
• All Purpose Cleaner - The all purpose cleaner provides a safe non-toxic liquid to aid in re-
moving dirt, grease, metal oxides and other contaminants which accumulate on fiberglass
• Ultra Fine Non-Metalic Abrasive Pads - Pads can be used with the all purpose cleaner to
remove stubborn contamination. Note - fiberglass wax may be required after use of cleaner
and/or pads to retain surface gloss.
• Clear Epoxy Refinishing Kit - The two part refinish kit is used to bring the tool surface back
to its original finish if normal cleaning is not sufficient
• Silicone Treated Wiping Cloths - Wiping cloths are used to remove light dust and dirt from
stick surfaces. It is also needed after light cleaning of tool with all purpose cleaner to allow
moisture to bead up on tool.
| CAT NO |
DESCRIPTION |
LBS |
| 10-171 |
COMPLETE CLEANING KIT |
11.0 |
| 10-169 |
1 GALLON ALL PURPOSE CLEANER |
8.0 |
| 10-170 |
BOX OF 20 ULTRA FINE NON METALIC
PADS |
0.5 |
| 10-100 |
1 QUART (TWO PARTS) CLEAR EPOXY
REFINISH KIT |
2.0 |
| 10-090 |
SILICONE TREATED WIPING CLOTH |
0.1 |
EPOXY REFINISH KIT
• Kit provides all the necessary materials with complete instructions for restoring, fiberglass hot
line tools and aerial lift booms and buckets equal to their original finish
• The epoxy coating provides a hard, tough, moisture resistant high-gloss finish of high dielectric
strength and is easily cleaned
• Included in the kit are complete instructions, sandpaper, paint brush, and epoxy solvent
• One quart of epoxy coating covers approximately 32 square feet of surface
• The coating is a two-part system, available in both white and clear, dries dust free in approxi-
mately 1 1/2 hours and cures completely within 24 hours
| CAT NO |
DESCRIPTION |
LBS |
| 10-100 |
EPOXY REFINISHING KIT - CLEAR 1 PINT EACH COMPONENT A, B, AND THINNER |
4.0 |
| 10-110 |
EPOXY REFINISHING KIT - CLEAR 2 QUARTS EACH COMPONENT A & B AND 1 QUART THINNER |
10.0 |
| 10-101 |
EPOXY REFINISHING KIT - WHITE 1 PINT EACH COMPONENT A, B, AND THINNER |
4.0 |
| 10-111 |
EPOXY REFINISHING KIT - WHITE 2 QUARTS EACH COMPONENT A & B AND 1 QUART THINNER |
10.0 |
| A30108 |
EPOXY THINNER - 1 PINT |
1.0 |
| A30109 |
EPOXY THINNER - 1 QUART |
2.0 |
