產品主要特點:
為了操作安全,使用時,必須戴好絕緣手套或者可根據情況使用射槍式絕緣操作桿
配有活栓,收緊索,和安全閂
頭部材料使用鋁合金,可以放置活栓
頭部下方的塑料透明罩能很快捷清楚地觀察
消弧器應與絕緣跳線配套使用
選用6605時,可另外單獨配置獨立的絕緣跳線
選用6600時,絕緣跳線是固定安裝在消弧器上的
用戶應事先指明所需連接絕緣跳線的各種參數
6600A是含2米長,額定電流為250A的絕緣跳線
產品編號 |
說明 |
Z大使用電壓(KV) |
額定電流(A) |
重量(kg) |
6600 |
可固定接引流線型 |
29.2 |
300 |
5.9 |
6605 |
螺栓型 |
29.2 |
300 |
6.2 |
6600A |
固定接引流線型 |
29.2 |
250 |
11.9 |
LOAD PICK UP TOOLS
Two models available
Load Pick Up Tool for installation on a cable assembly (clamp and cable sold separately)
Load Pick Up Tool with stud to utilize your ready made jumpers
Both models have a nominal rating of 27KV*
Current Rating 300 Amps*
Note: While the maximum rating for each model is stated above, the actual rating will be the lesser
of these values, or of the rating of the components used with the Load Pick Up Tool. If 15KV jumper
cable is being used, the entire assembly will be rated at 15KV. If the jumper cable is less than 2/0
AWG, the current rating will be reduced accordingly.
Can be installed with a shotgun stick or with rubber gloves, in accordance with your company’s safe
work practices
Both tools come completely self contained with cocking tool, firing lanyard, and safety latch
The head casting is aluminum alloy and also serves as a storage port for the cocking tool
Clear plastic housing below the head casting allows for quick, easy visual inspection
Each tool comes complete with an operating and maintenance manual
Note: Load Pick Up Tools are not load break devices
Note: For use on 15KV or 25KV systems only
CAT NO |
DESCRIPTION |
MAIN LINE RANGE |
KV RATING |
CURRENT |
LBS |
|
|
|
MAXIMUM |
MINIMUM |
|
|
|
6600 |
LOAD PICK UP TOOL / CABLE *CLAMP AND CABLE SOLD SEPARATELY |
6 SOLID .16 DIAMETER |
1033 MCM 1.25 DIAMETER |
29.2KV MAXIMUM |
300A MAXIMUM |
5.9 |
6605 |
LOAD PICK UP TOOL / STUD |
6 SOLID .16 DIAMETER |
1033 MCM 1.25 DIAMETER |
29.2KV MAXIMUM |
300A MAXIMUM |
6.2 |
01-089 |
PADDED CARRYING CASE FOR 6605 |
2.7 |
||||
CONTACT FACTORY FOR ASSISTANCE IN
CONFIGURING A LOAD PICK UP TOOL CABLE ASSEMBLY |