TRIPOD FIBERGLASS RAIL ASSEMBLY
• Designed to be used with 42” and 4’ platforms only
• Allows linemen to move freely while maintaining their balance when
performing rubber glove work
• Rail assembly hinges and stores flat on top of the platform by simply
removing the keeper pin
• The tripod rail is a positioning device that will allow the worker to main-
tain proper work positioning and balance
• Not to be used as an anchor point
| CAT NO |
DESCRIPTION |
LBS |
| -A |
TRIPOD RAIL TO BE USED WITH CATALOG NUMBERS
8416 AND 8401 WHEN ORDERING ADD THE SUFFIX - A TO
THE PLATFORM # |
6.0 |
HORIZONTAL FIBERGLASS RAIL ASSEMBLY
• Designed to be used with platforms 4’, 6’, 8’, and 10’ long
• The rail assembly hinges and stores on top of the platform by
removing the keeper pin
• The horizontal rail assembly is a positioning device that will allow
the worker to maintain proper work positioning and balance
• Not to be used as an anchor point
| CAT NO |
DESCRIPTION |
LBS |
| -B |
HORIZONTAL FIBERGLASS RAIL TO BE USED WITH CATALOG NUMBERS 8401, 8402, 8403, AND 8404 WHEN ORDERING ADD THE SUFFIX -B TO
THE PLATFORM # |
12.0 |
PIVOT STYLE ATTACHMENT
• Pivot style mounting base can be ordered as an option on
adjustable style platforms only
• Designed to be used with platforms 4’, 6’, 8’, and 10’ long
• Platform can be positioned in 30 degree increments up to 180
degrees under load by loosening wheel tightener.
• Two models available - standard and short clearance models
| CAT NO |
DESCRIPTION |
LBS |
| -C |
STANDARD PIVOT STYLE ATTACHMENT DISTANCE BETWEEN CHAIN BINDERS -
33” TO BE USED WITH CATALOG NUMBERS 8401, 8402, 8403, AND 8404 WHEN ORDERING ADD THE SUFFIX -C TO
THE PLATFORM # |
23.0 |
| -D |
SHORT CLEARANCE PIVOT STYLE
ATTACHMENT DISTANCE BETWEEN CHAIN BINDERS -
21” TO BE USED WITH CATALOG NUMBERS
8401 AND 8402. WHEN ORDERING ADD THE SUFFIX -D TO
THE PLATFORM # |
17.0 |
TRIPOD RAIL ASSEMBLY, HORIZONTAL RAIL ASSEMBLY, AND PIVOT STYLE ATTACHMENTS
CAN NOT BE ADDED TO PLATFORMS PREVIOUSLY PURCHASED
