CROSS ARM GUARD
• Designed for easy installation and removal
• Rated at 15 KV phase to ground
• Equipped with eye and can be installed with all shotgun
hot sticks. Guard is pulled down over arm and slid into
proper position.
• Fits distribution and sub transmission arm sizes
• Provides a barrier to prevent tie wires from contacting
pins or cross arms
• Sides are slotted so guards can be installed over double
arming bolts
• Brush contact only
| CAT NO |
DESCRIPTION |
LBS |
| 12012 |
CROSS ARM GUARD |
2.5 |
POLE GUARDS - WRAP AROUND STYLE
• Designed for easy installation and removal
• Guards are tested at 35KV
• Corrugated design allows unit to be easily opened for
installing. Supplied with rubber straps to secure the
guard to the pole. Strap can be removed with hot stick.
• Fits poles from 6” to 12” in diameter
• Brush contact only
| CAT NO |
DESCRIPTION |
LBS |
| 11924 |
2’ POLE GUARD |
6.0 |
| 11926 |
4’ POLE GUARD |
12.0 |
| 11927 |
6’ POLE GUARD |
18.5 |
