FIBERGLASS EXTENSION ARM
• The Fiberglass Extension Arm is designed for use as a temporary aid in replacing existing conductors and
insulators, or as an aid for moving out conductors to obtain working clearance in congested areas
• Easy to install conductor holders are adjustable
• Eye bolts are silicon bronze to prevent seizing
• Load limit 150 lbs. per conductor holder
• Rating 15KV without insulator and 34.5KV with insulator
2 1/2” DIAMETER FIBERGLASS EXTENSION ARM
FOR DISTRIBUTION CROSS ARMS
FITS MAXIMUM CROSS ARM SIZE 4 1/4” W x 6 3/4” H
CAT NO DESCRIPTION LBS
5000 5’ ARM WITH
ONE CONDUCTOR 11.3
HOLDER
5001 5’ ARM WITH
ONE CONDUCTOR 11.5
HOLDER AND INSULATOR
5006 6’ ARM WITH
TWO CONDUCTOR 14.5
HOLDERS
5007 6’ ARM WITH TWO
CONDUCTOR 15.5
HOLDERS AND INSULATORS
2 1/2” DIAMETER FIBERGLASS EXTENSION ARM
FOR SUB TRANSMISSION ARMS
FITS MAXIMUM CROSS ARM SIZE 5 1/4” W x 6” H
CAT NO DESCRIPTION LBS
5036 5’ ARM WITH
ONE CONDUCTOR 12.0
HOLDER
5037 5’ ARM WITH
ONE CONDUCTOR 12.3
HOLDER AND INSULATOR
5016 6’ ARM WITH
TWO CONDUCTOR 14.5
HOLDERS
5016-1 6’
ARM WITH TWO CONDUCTOR 15.5
HOLDERS AND INSULATORS
EXTENSION ARM ACCESSORIES FOR ALL 2 1/2” O.D. ARMS
CAT NO DESCRIPTION LBS
A10001 CONDUCTOR HOLDER ONLY 2.3
A10002 CONDUCTOR HOLDER AND INSULATOR 2.5
A30008 INSULATOR FOR USE WITH A10001 AND A10038 CONDUCTOR HOLDERS 1.0
A10038 LARGE CONDUCTOR HOLDER HAS 2 5/8” OPENING 2.8
A10039 LARGE CONDUCTOR HOLDER AND INSULATOR 3.8
P10024 EYE SCREW REPLACEMENT
