STRAP HOIST ISOLATING LINKS
• Strap hoist isolating links are designed to provide extra protection when used
with strap hoists on primary voltages. The fiberglass link helps to overcome the
loss of dielectric properties when the web straps become contaminated through
field use.
• Isolating links can be used with most strap hoists.
• Load limit 4000 lbs.
• Lightweight - 1” diameter fiberglass.
ISOLATING LINK
WITH STANDARD SWIVEL EYE ONE END
AND SAFETY HOOK
CAT NO LENGTH
OF LBS
FIBERGLASS
3413 6” 2.3
3414 12” 2.5
ISOLATING LINK STICKS WITH
HOT STICK OPERATED SAFETY LATCH
*3413-1 6” 2.3
*3414-1 12” 2.5
ISOLATING LINK
WITH STANDARD SAFETY HOOK,
CLEVIS ROLLER AND PIN
CAT NO LENGTH
OF LBS
FIBERGLASS
3409 6” 2.3
3410A 12” 2.5
ISOLATING LINK STICKS WITH
HOT STICK OPERATED SAFETY LATCH
*3409-1 6” 2.3
*3410-1 12” 2.5
| ISOLATING LINK WITH DOUBLE SWIVEL EYE |
||
| LENGTH OF FIBERGLASS |
LBS |
|
| 6” |
2.3 |
|
| 12” |
2.5 |
|
NOTE: Clevis type link sticks will accept straps up to 1 5/8” wide.
*CAUTION: These isolating links are not to be used in place of
insulators or to eliminate rubber gloves and sleeves when pulling or
lifting energized conductors.
