WIRE TONG BAND
• When installed on larger diameter wire tongs, rope
blocks can be used for raising and lowering conductors
| CAT NO |
DESCRIPTION |
LBS |
| 1829 |
BAND FOR 2” O.D. WIRE TONGS |
1.8 |
| 1829-1 |
BAND FOR 2 1/2” O.D. WIRE TONGS |
2.1 |
| 1829-2 |
BAND FOR 3” O.D. WIRE TONGS |
2.9 |
WIRE TONG BLOCKS CLAMP
• When installed on wire tongs, rope blocks can be
used for controlling conductors. Pulling in tension.
| CAT NO |
DESCRIPTION |
LBS |
| 5748-15 |
CLAMP FOR 1 1/2” O.D. WIRE TONG |
2.2 |
| 5748-16 |
CLAMP FOR 2” O.D. WIRE TONG |
2.6 |
| 5748-17 |
CLAMP FOR 2 1/2” O.D. WIRE TONG |
3.0 |
WIRE TONG STIRRUP
• Head of wire tong can be installed in stirrup to
help aid in rigging and lifting of wire tong
| CAT NO |
DESCRIPTION |
LBS |
| 1851 |
STIRRUP FOR 2” O.D. WIRE TONG |
2.2 |
| 1851-1 |
STIRRUP FOR 2 1/2” O.D. WIRE TONG |
2.3 |
ROPE SNUBBING BRACKET
• A rope snubbing bracket is used to terminate block
fall lines and hold blocks in proper position. Com-
plete with chain tightener.
| CAT NO |
DESCRIPTION |
LBS |
| 1945 |
ROPE SNUBBING BRACKET |
6.0 |
WIRE TONG SNUB BRACKET
• A wire tong snubbing bracket provides a stationary
base for wire tongs and auxiliary arms. Complete
with chain tightener.
| CAT NO |
DESCRIPTION |
LBS |
| 5900-25 |
WIRE TONG SNUB BRACKET |
6.9 |
CHAIN TIGHTENER / CHAIN EXTENSION
CAT NO DESCRIPTION LOAD
LIMIT
LBS
5030 CHAIN TIGHTENER WITH 36”
CHAIN AND SPRING LOADED
TAKE-UP
2500 lbs. 5.5
5031 CHAIN EXTENSION 18” WITH
KEEPER AND SAFETY PIN
2500 lbs. 2.5
